Water Meter Rooms
Problems of Concrete Water Meter Room
- With its weight of 550 kg, it requires heavy equipment for transportation and assembly.
- Long assembly time.
- Frequent breaks and cracks during transportation and assembly.
- Wear and thinning of concrete over time due to the effects of water and chemicals.
- Condensation occurs as a result of temperature changes and meters cannot be read.
- In cold winter weather, meters freeze and become unusable.
Advantages of Plastic Manholes
- With a weight of 30 kg, it can be loaded and assembled even by 1 person.
- With the transition to plastic, the number of water meter rooms installed in one day has increased 3 times.
- With the transition to plastic, the number of water meter rooms installed in one day has increased 3 times.
- Provides high resistance to water and chemicals.
- It is long lasting.
- It is 100% leak proof. Leak-proof connections can be made with plastic pipes.
- The filled cover serves as insulation.
- TSE 1478 A15 certificate has been received for the cover.
Street Nozzle / Grid Base
- Street Nozzle / Grid Bases are used to collect rainwater from roads and open areas and direct it to manholes.
Check Valve Boxes
- Check valves are used to prevent backflow of liquid flow in the pipeline. Check valves must be mounted horizontally and inside the manhole to enable maintenance/cleaning activities.
Maslak, Catchment and Valve Room
- Collection pools and wells constructed with special techniques are used to ensure that thermal waters do not mix with underground and surface waters, do not get polluted, do not change their flow rate, temperature and chemical composition as they come to the surface naturally or mechanically, prevent the gases in the water from escaping, and collect thermal waters in the best possible way. These are facilities consisting of galleries, boreholes and similar facilities and a mixture of these. Valve rooms are rooms that provide the discharge, distribution and cleaning of clean water in catchment or maslak rooms with the help of various valves. With its Subterra branded PE infrastructure product series, Floteks can produce suitable solutions for valves and catchment rooms of all sizes.
Suction Cup Room
- These are valve chambers that operate according to hydromechanical principles and are used to ensure air intake and discharge of air from the line during the filling, emptying and operation of pipelines. Floteks can produce suction chamber solutions suitable for lines and suction cups of all diameters in its Subetrra brand PE infrastructure product series.
Evacuation Room
- These are structures built with the capacity to completely discharge the flow from the main channel into a side stream when necessary. It is generally placed immediately upstream of important artistic structures or downstream of these structures if there is a dangerous amount of water that may come from floodwater channeling structures. Evacuation structures can only fulfill their duties as a result of a maneuver. Floteks Suberra brand Pe infrastructure product series can produce suitable solutions for all diameters of lines and discharge rooms.
Main Line Cutting and Separation Rooms
- They are structures that can turn a certain part of the water passing through a channel into another channel whenever desired. The Contractor will prepare the projects for the sockets on the irrigation channels and submit them to the approval of the Administration. In its Subterra branded PE infrastructure product series, Floteks can produce solutions suitable for main line cutting (separation) rooms of all diameters.
Description of Valves and Suction Cups Used in Rooms
- Elastosmer seat gate valves completely stop the flow of water when fully closed and do not leak water at all. When the valves are fully open, they do not have any effect that would disrupt the water flow. Sealing is provided by a vulcanized metal-rubber slide. The slide moves up and down when the non-rising spindle mechanism with functional gear path is rotated. Additionally, it is possible to see the valve position from the outside with the optional hand position indicator. Elastomer Seat Gate Valves are manufactured from GGG40 Sfreo Casting material as standard.